User properties
A user property can be assigned to desired users to make searching and identification easier. On this page (Administration > User properties) the overview of all created candidate properties is displayed. In addition, there is a tab for supervisor properties. These tabs each have their own list of properties.
User properties contain unique values for the user and can therefore not be filtered in the way that, for example, can be filtered on candidate groups. If the search finds several users with the same value for the property, a drop-down list is displayed to select the correct user.
Use the 'New property' button at the top right of the screen to create a new property. Give the property a name, type, any requirement to set, and the form of user rights, as shown in the image below.
Tip!
For paper tests, the 'code/characteristic' field is used as standard for a candidate to make a link with the candidate via the answer sheet. This field is sometimes already used for other purposes (e.g. SSO) Using a new field works as follows:
1. Create a new numerical field with a unique name in the user properties
2. Go to **Administration > Settings ** and locate the setting for "Paper Test Result Settings".
3. In this field, select the field created for the paper test results.
Disclaimer: This text was automatically translated from the Dutch version.